Welcome To Electrician Mentor
Your Online Resource For Learning How to Become an Electrician

Best Circuit Breaker Finder

People who live in older homes might have experienced common electrical household troubles, one of which is the lighting that’s occasionally becoming dimmer, then bright again after a moment, even though they’re not adjusting their output.

Another one is experiencing an electrical overload. It’s a dangerous electrical problem that is most likely experienced when people turn on several appliances in the house all at once, causing the power to completely go out.

One of the electrical tools that can be used to determine and solve such problems is a circuit breaker finder.

When you say circuit breaker finder, people often commit the common mistake of putting the tool in a similar context as circuit breaker tracer.

What is a circuit breaker finder and what is its difference from a circuit breaker? Let’s see in the coming section.

WHAT IS A CIRCUIT BREAKER FINDER?

Circuit breakers are safety devices, promoting convenience among their users. It is used to protect electrical systems from overloading the circuit wires or experiencing a short circuit. Circuit breakers perform a very important role as they make sure that the electricity is disabled whenever people have too much load on their single circuit.

A device called circuit breaker finder makes it easy for people to sort out and fix the common household electronic troubles. It easily locates a circuit within an electrical power panel or load center. This device also works for either circuit breakers or fuses.

CIRCUIT BREAKER FINDER VS CIRCUIT BREAKER TRACER

A circuit breaker finder typically works on circuits that are energized. The transmitter plugs into an outlet and draws spikes current off the line for a short duration, yielding a strong signal. With this, the device doesn’t need batteries and it doesn’t really do much other than drawing current pulses that the receiver detects. In addition, the device is only intended to work on short distances between the current carrying parts in the breaker and the tool. Therefore, the receiver doesn’t need high sensitivity that much to determine the proper breaker.

A circuit breaker tracer is a device used to follow or trace the path of a circuit. Electricians, especially professional ones, use this device to trace wires for them to be able to remodel a house, knowing the circuit system behind the walls that workers may or may not be removing. These tools are also used to find short circuits or follow a wire located within an electrical conduit.

Circuit breaker tracers can work on either energized (live) circuits or de-energized (open) circuits.

Now that we know what circuit breaker finders are and what they do, let’s answer the question: How does it actually work?

HOW DO CIRCUIT BREAKER FINDERS WORK?

The electronic breaker finder works with a transmitter and a receiver. The transmitter is plugged into the outlet where you’re trying to determine the controlling circuit breaker or fuse. As what have been previously told, the receiver detects the current pulses that the device draws.

At the electrical service panel, the user will use the electronic receiver paired with the transmitter. When the receiver detects the electronic signal from the transmitter when it passes over the circuit and the circuit breaker, it rapidly beeps and flashes.

A follow-up question to this section will be: How do you use such device?

HOW TO USE A CIRCUIT BREAKER FINDER?

Before anything else, you always have to test the device’s transmitter and receiver. Make sure the receiver will detect the transmitter’s signal. Place the receiver near the transmitter. If the receiver is working and the wall outlet’s power is on, a distinctive beep will be heard, occurring about six times per second, and the LED will flash.

Here are the steps on matching a circuit to a circuit breaker:

  1. While the power is on, plug the transmitter into the said wall outlet.
  2. At the circuit breaker panel or fuse box, hold the receiver such that the surface of the tapered end is at a right angle, directly on the face of the circuit breaker or fuse.
  3. Slowly move the receiver in an up-and-down motion over the row(s) of circuit breakers, while continually lowering its sensitivity by rotating the wheel away from the panel box until only one breaker causes it to beep.
  4. After locating the right breaker, turn off the circuit and the receiver will stop beeping.
  5. Check if the red light on the transmitter in the outlet is off as this confirms that the right breaker had been turned off.

THINGS TO CONSIDER BEFORE BUYING A CIRCUIT BREAKER FINDER

Before buying any product, there will always be things you should keep in mind before actually going to purchase an item. Here’s a very short list of 3 things to consider before placing a purchase on a circuit breaker finder:

  1. QUALITY: As always, this is included. You never go wrong with an item that has an outstanding quality. If the products were made of high-quality materials, consumers like you will save big time on time and money. Important reminder: Just because the product is expensive doesn’t mean it’s as what it’s advertised. Sometimes, these things can lead you to more expenses than what you originally intend to pay for.
  1. DURABILITY: Quality and durability will always be on this kind of lists. Durability is the strongest one to determine if your item will last long for your benefit of usage. If a product were high quality made, there’s a big possibility that it also has a high durability feature.
  1. FEATURES: What does this circuit breaker finder have that other brands don’t? Are these features worth every penny? Do these features suit the job needed?

These questions are just some of the things you should ask yourself before going to buy the tool. Keep in mind that knowing the products’ features is very important as it will greatly affect how you’ll perform and finish the given task with the tool.

To help you more about what to purchase, we’ve picked out the top 5 circuit breaker finders in the market. The items are as follows:

 


 

 

NameGFCI TesterGround PlugAudibleVisual IndicatorWarrantyPrice
Klein Tools ET300 NoNo YesLED2 Years$$
Extech CB10 YesYesYesLED1 Year$$$
Sperry Instruments CSC550AYesYesYesLED ArrayLifetime (Limited)$$
Amprobe BT-120 NoNoYesLED1 Year$
IDEAL 61-534YesYesYesYes2 Year$$$

 

 


Klein Tools ET300 Digital Circuit Breaker Finder

As everyone knows, Klein Tools is one of the leading brands for workman’s tool needs. Klein’s innovative line of test and measurement equipment is specifically designed to fit the needs of every workman, especially electricians. The brand promotes reliability, high durability, and functionality, resulting in an optimum performance.

Klein’s circuit breaker finder features quick, accurate and automatic detection of the circuit breaker of any 120V standard outlet. It comes with a strong transmitter that can reach up to 1000 feet. The transmitter also has a two prong outlet that allows you to use in almost any outlet.

The product’s button activated receiver ensures you that it’s only checking for a signal when placed in the appropriate location. The flashing arrow on the device is an indicator that lets you identify when you’ve got a hit. The product is also designed to have an automatic power-off feature that saves battery life for everyone’s convenience.

Pros:

  • This device’s transmitter can send a clear signal up to 1000 feet in distance.
  • Sensitivity won’t be a problem as the receiver is a microprocessor controlled and the transmitter is sending a digital signal.
  • It has an auto power-off feature that saves battery life.
  • The product comes with a case made from thick and reinforced plastic that can withstand more use than other models and can’t be wrecked easily.

Cons:

  • The product was not as advertised.
  • There’s a design flaw wherein the device will turn on when it bumps on its case.
  • The switch button is sensitive.

 


Extech CB10 Circuit Breaker Finder

The Extech Company produces high quality testing tools at an affordable price. Their tools are mostly popular among handymen, electricians and apprentices.

Extech’s AC circuit breaker allows the user to easily locate circuit breakers and test receptacle wires. It enables the user to quickly 110V to 125V AC circuits, and when it does find the correct circuit breaker, flashing LEDs and audible beeps serve as an indicator.

Portability is evident as this device’s transmitter and receiver can be snapped together for easier storage. Easier work is also featured as you only need to plug the transmitter into an outlet and trace the correct breaker at the electrical box.

Its transmitter also verifies wiring ant tests GFCI operation. The bright red and green LEDs determine if the receptacle is correctly wired or if not, it will indicate which of the 5 fault conditions exists.

Pros:

  • It’s very portable with its snap-together transmitter and receiver.
  • It has an adjustable sensitivity to be able to pinpoint the correct circuit breaker.
  • The circuit breaker finder can quickly locate 110V to 125V circuit breakers and fuses.
  • The product comes with an audible beeper and flashing LED for indicators.

Cons:

  • The product breaks easily.
  • The product doesn’t pinpoint the actual circuit.

 


Sperry Instruments CSC550A Circuit Breaker Finder

Sperry allows its users to quickly and easily locate electrical circuits (alternate circuits of 110V – 125V).

This circuit breaker finder works by simply plugging the transmitter into a receptacle in the room where you want to work, and then testing the breakers to identify the correct breakers through the receiver.

The receiver has two indicators which alert you when the correct breaker is found: the visual flashlight and the audible beeping sound.

Pros:

  • The device does not interfere with sensitive electronic equipment.
  • The circuit breaker finder quickly identifies individual branch circuits at the panel box without interrupting power.
  • The product is compact in size and is definitely easy to use.
  • It comes with distinctive signals (audible and visual indicators) that let the user know that he found the correct circuit breaker.

Cons:

  • Some say that the product worked in their first time of using it and then the device dies when it’s time for the second use.
  • The online instructions on how to use the product isn’t quite clear.

 

 


 

Amprobe BT-120 Circuit Breaker Tracer

Amprobe’s circuit breaker tracer identifies circuit breakers on energized (live) electrical systems.

The transmitter is plugged into an outlet while the receiver finds the correct breaker with its automatic and adjustable sensitivity and light and sound as indicators.

The transmitters red LED indicator verifies that the receptacle is energized before receptacle or wiring maintenance.

Pros:

  • The product is relatively easy to use and very convenient among its consumers.
  • It always finds the correct breaker.
  • It is compatible with the standard 90 to 120V AC 50/60 Hz breaker system.
  • This circuit breaker tracer can identify circuit breakers on energized 120V electrical systems.
  • It maps the outlet with plugged in transmitter to the correct breaker indicated by the receiver.

Cons:

  • The device seemed to have poor signal.
  • For some, the product doesn’t work beyond about 12 feet in distance.
  • The device needs to be turned off to be reset each time when going to a different outlet.

 


IDEAL 61-534 Digital Circuit Breaker Finder

IDEAL’s automatic circuit breaker finder comes with a digital receiver. It also has a 120 volt-240 volt GFCI tester.

It automatically indicates the right breaker and with the help of the GFCI tester, the wiring can also be verified if it’s correctly wired or if it isn’t, it will indicate which of the 5 fault condition exists in the system.

Pros:

  • The device is UL and CE approved.
  • It has a two-year warranty.
  • It positively identifies circuit breakers and fuses without service interruption.
  • The product comes with a GFCI tester that indicates if the wiring is correctly wired or falls under the 5 fault conditions.

Cons:

  • The identifier wasn’t very accurate.
  • It’s hard to get it to work.

 


CONCLUSION

We have come to the end of this article. Hopefully, this article guided you through the world of circuit breaker finders and helped you a lot through the guides and product reviews.

Best Hole Saw Kit for Electricians

Hole saws are one of the most essential tools you will be able to find in the toolbox of workmen such as construction workers, handymen, plumbers, electricians, carpenters, and etc.

It seems to play a very important role among a number of field jobs, and sure enough, it’s proven to be true. One of the things it does is to help workmen to easily create a hole for various purposes.

If hole saws were not invented, people would have a hard time dealing with hole operations as they would have to use a drill to create holes in different surfaces like studs, floors, and joists.

Before going further through the discussion of this tool, let us first answer the question the common question people, who are not that familiar with identifying certain tools, ask: “What is a hole saw and why will I need it?”

 


 

 

My List Of Best Hole Saws

NamePiecesWeight (lbs.)Hole Size Range (Inches)
DEWALT D180002 93.2 7/8" to 2-1/2"
Milwaukee 49-22-41852814.43/4" to 4-3/4"
LENOX Hole Saw Kit 177.73/4" to 4-3/4"
Greenlee 660 71.37/8" to 2"
Greenlee 830 73.17/8" to 2-1/2"

 


DEWALT  Electricians Bi-metal Hole Saw Kit

DeWalt’s hole saw kit is specially designed to cut holes on wood and metal. This features thick and hardened backing plates that reduce warping, and at the same time, make the saw long-lasting.

Its advanced deep-cut style allows wider application of hole cutting on any type of material than other hole saw brands.

Pros:

  • The kit comes with replacement parts.
  • The product is made in the USA.
  • Endurance is evident with the enlarged bi-metal section.
  • It is built to withstand jobsite abuse.

Cons:

  • The pilot bit and the chuck arbor break easily.

 


Milwaukee All Purpose Professional Ice Hardened Hole Saw Kit

Milwaukee Electric Tool Corporation’s all-purpose hole saw kit is ideal for metal and wood cutting in a variety of maintenance/repair applications such as electrical, plumbing, and etc.

This ice hardened product is consistently hard as it utilizes a propriety cryogenic hardening process. This hole saw kit also features Matrix II bi-metal construction for greater durability and a unique tooth geometry for faster cutting.

Pros:

  • Milwaukee Electric Tool Corporation ensures users to up to a 50% longer life and usage than other brands.
  • The kit promotes high durability.
  • Its unique precision-ground tooth geometry features faster hole cutting.
  • The product has a wide range of application.

Cons:

  • Disassembling of the cutter with fixture can be complicated after use.

 


LENOX Tools Bi-Metal Speed Slot Hole Saw with T3 Technology, Electrician’s Kit

LENOX’s hole saw kit features enhanced tooth geometry, cutting 50% faster than the previous hole saw models. The product has thicker walls to minimize or avoid tooth loss and improve durability.

While the staircase speed slots have wide slots placed on each hole saw that makes it easy to work plugs out, this design also removes sawdust and chips from the inside to prevent plugs getting stuck in each saw.

Pros:

  • It effectively removes sawdust and chips to prevent plugs from getting stuck.
  • This model is 10% taller than the previous ones for improved and cleaner cuts.
  • This hole saw kits features 2x more durability than the previous generation.

Cons:

  • There were no sizes listed in the product advertisement, leading to confusion.

 


Greenlee 660 Kwik Change Stainless Steel Hole Cutter Kit

Greenlee’s hole cutter features a quick change arbor that can be used with all cutter sizes and makes saw changes easy with its push button design.

It’s improved carbide quality cuts stainless steel and other materials quickly.

The kit’s optimum performance and durability make it compatible with all standard power tools.

Pros:

  • The product’s flange stop prevents over-drilling.
  • The brand promotes high durability and quality performance.
  • Greenlee’s hole saw kit’s numerous features make it ready for any job.

Cons:

  • The pilot bit slides off after fast speed drilling, at some time.

 


Greenlee 830 Bi-Metal Hole Saw Kit

Greenlee’s bi-metal hole saw kit features an extra thick back plate for vibration minimization.

The hole saws can be applied to a variety of materials such as aluminum, fiberglass, steel, tin, wood, and plastic.

Pros:

  • The kit comes with a high-impact, rugged plastic carrying case.
  • The kit includes 7 hole saws that are applicable to various materials.
  • It’s thick back plate design minimizes vibration.

Cons:

  • No note-worthy cons.

 

 

WHAT IS A HOLE SAW?

Hole saws are cylindrical cups with a toothed edge for cutting various sizes of holes in different kinds of materials. Literally, these tools doesn’t have anything to do with saws as they are cutting accessories, ring in shape, used with drills to create clean and round holes in different kinds of medium.

There are two types of hole saws, namely, adjustable hole saws and circle cutter hole saws.

Adjustable hole saws consist of a number of thin metal saw blade-like strips, and a flat disc with numerous grooves in one side and a shank on the other.

Circle cutter hole saws are formed by having adjustable teeth on a platform with a pilot bit. This type is available in sizes, from a foot to a larger size. It can also be used for accurate large circle cutting.

Now that we have knowledge about what hole saws are, let us identify how it works. We all know that it lets users drill holes, if not flawlessly, in a very neat way. However, how would you work with such tool? What are the measures you’d want to know; especially when it’s your first time using a hole saw.

HOW WILL YOU WORK WITH A HOLE SAW ON HAND?

Choose the Right Size for the Specified Job: Like everything in this world has a certain part in a suited situation, every tool you have in your toolbox has a special role to play in a job suited for them. From screwdrivers to saws, these things have different sizes, shapes, and even types, because even if they are for the same type of operation, there will always be a situation that the job requires more than what the tool already have. The hole saw is no different from these tools, as size is the most important thing on this one. Determine the size of the hole you are going to make by using the measuring tape. Choose the proper hole size for accurate hole cutting.

Know How Deep It Has to Go: Determine how deep you want the hole to be when selecting the right hole saw bit. A hole saw bit can go an inch, by the standard. However, if you need a deeper hole for a specified job, look at the saw bit to check if you have the correct size.

Determine Which Drill to Use: When creating a hole, the drill is the perfect partner of hole saws. The choice of drill depends on the size of the hole you want to make, of course, considering the fact that the drill needs to have enough power to be able to actually make the hole you require and the material you’re drilling a hole through. Small holes need at least a drill with 12 volts while larger holes need more than that.

Use the Hole Saw: You have to locate the center of the hole you are going to drill and mark the starting point, creating a pilot hole and acting as a stabilizer. Line the pilot bit with the mark on the starting point and drill. While drilling, hold the tool firmly but slowly do so for friction reduction between the drill and the surface of the medium you’re drilling through. Make sure the hole saw drill you’re using is sharp as dull hole saws will tend to give you poor finished products.

HOW TO USE A HOLE SAW?

  1. Maintain a Proper Setup: Mount the hole saw in the arbour. A hole saw that has an adjustable centre bit, it should extend past the toothed edge of the saw about 3/8 inch. If the center bit has a flat spot on its shank, align it with the setscrew then tighten the setscrew to secure the bit in place. Tighten the hole saw in the chuck of a corded drill.
  2. Do It Slowly but Surely: The key to getting a clean, straight, and splinter-free hole is taking it slowly as it reduces the friction it generates when drilling a hole.
  3. Enlarge an Existing Hole via Clamping: Clamp a ¼ inch piece of plywood over the existing hole to provide a solid surface for the centre bit. Jamming a wood plug into the existing hole will also do the job.
  4. Clear Out Dust When Drilling Deep Holes: Always remember to withdraw the hole saw every five seconds to clear the sawdust build up in it.

Now we know how what hole saws are and how you can use them. We have pointed out earlier that you can’t actually make holes with a hole saw alone as it needs to be attached on a drill. However, another question links in with this point. “How do you attach it on a drill?”

HOW TO ATTACH A HOLE SAW ON A DRILL?

Choose your drill, wisely: Without a drill, a hole saw is pretty much useless as it only relies on the rotational power of the drill in order to comply with its main purpose. The recommended drill for the task of creating a hole has at least 14 volts of power. If you are going to use a cordless drill, make sure that the power is increased to 18 volts. Like what had been said in the previous section, the sharper the drill, the more consistent and accurate the finished product will be. Otherwise, it will result in a poorly finished product and unsatisfied users.

Connect the pilot drill to the chuck arbor: Pilot drill is what connects the hole saw to the drill, and hole saw packages usually come with this. This also provides an anchor to be able to connect the hole saw to the drill securely. It fits the hole saw on one end and the chuck arbor on the drill on the other end. Make sure that the pilot drill is firmly connected on the chuck arbor while it’s attached tightly in place.

Attach the hole saw to the pilot drill: Hole saws come in different sizes, from 1 inch to 4 inches and so on and so forth. Choose the hole saw with the size that is suited for the hole operation you’re about to do. Attach the hole saw bit to the pilot drill by using the threads in the chuck arbor. Screw the two tightly and use the screwdriver to make sure that the screws are firmly attached.

Lock the hole saw: After doing the earlier steps from this section, lock the hole saw using its featured mechanism. As soon as it is locked, then the drill is ready for use.

An important reminder: Make sure that the drill is not connected to a power source when you are attaching the hole saw to a drill.

HOW I MADE MY PRODUCT PICKS?

  1. Quality: It is very important to do a quality check before making a purchase of anything. This is pretty common sense; however, a lot of people fall for it the endorsement traps. It’s an important reminder that just because the product is expensive, it doesn’t already mean that they are true to their words in their advertisements.
  2. Durability: Quality and Durability are two things that won’t get away when stating things to consider before buying tools. It’s a waste of time and money if you found out that the hole saw you just bought last week isn’t working anymore. Make sure that the product you chose is of good quality. Good quality will always be equal to high durability.
  3. Which is which: There are different kinds of hole saws and every single one of it is meant to play a significant role on the job. Carbon-steel hole saws are for drilling wood; Bimetal hole saws are for drilling wood and metal and are a sure bet for lasting a lot longer than other hole saws; Diamond grit hole saws are used for drilling hard materials like tiles and stones.

CONCLUSION

We have reached the end of this article. Hopefully, this article helped you a lot in understanding more about hole saw; what it is and how it works. Knowing more about something is a big plus here in the age of information.

Best Conduit Reamer

A conduit reamer will be a commercial electrician’s best tool, especially when thousands of feet of conduit needs to be ran.

Some tools that compliment the pipe reamer are:

These are some of the primary tools you will use when installing and EMT conduit and THHN wire.

Modern conduit reamers are quite advanced and productive.

They come in manual and automatic versions, either of them being very effective depending on the size of the job at hand.

Buying a conduit reaming tool is an investment that, if made correctly, will last you for several years.

However, how should you go about buying a conduit reamer and which ones are the best in the market at the moment? If you go on a look out yourself, you may be boggled by the choices you have, both of high and low quality. Of course, you want to avoid the latter.

To help you with this, I have curated this article within which I am going to discuss some of the top conduit reamers available for purchase and how to make sure one of them is perfect for your requirements.

Why Do You Need A Conduit Reamer

Perhaps you are an old school electrician and are wondering why you would need an additional tool in your arsenal.

Many years ago, the way that workmen were taught to ream conduit was to strip the ends off the channel locks, insert them into the pipe, then twist it. Then take the other end to go on the outside and clean it. Then check it for any burrs. After assembling the fitting, the workmen would have to get a screw driver and then tighten the fitting, before their conduit was ready to go.

Now with the modern conduit reamers, this job is much more efficient. After cutting the pipe, just take the conduit reamer into the pipe and ream it. After that, just take your fitting and screw it with the add-on that is already on the conduit reamer.

How I Picked The Best Conduit Reamers For My List

Picking out the best products from a pool of options can require experience, knowledge and a lot of time. Thankfully, you do not have to go through this process as I have done the hard work for you.

To make my list full of quality and unbiased products, I first shortlisted the conduit reamers which had a high customer feedback score on the top online marketplaces. After that I eliminated the products which had limited features, but were charging the same price as an advanced tool. Lastly, I cleared my list off any products that did not come with a warranty.

The properties I looked for in my conduit reamers were the sizes they supported, the quickness with which they did their job and their durability. These are the most important features in my opinion and weighed in largely during my product selection and elimination from my short list.

My Picks For Best Conduit Reamers

NameSizesDrill AttachablePrice
Klein Reaming Screwdriver1/2″, 3/4″, and 1″No$$
Dewalt Conduit Reamer1/2″, 3/4″, and 1″No$
Klein Reaming Drill Head1/2″, 3/4″, and 1″Yes$$
Greenlee Reaming Screwdriver1/2″, 3/4″, and 1″No$$$
Southwire Reaming Screwdriver1/2″, 3/4″, and 1″No$$
Ideal Conduit Reamer1/2″, 3/4″ and 1″Yes$$$

 


Klein Tools  Reaming Screwdriver

Klein Tools is one of the most renowned brands when it comes to hardware for professionals.

While it does not specially cater to the needs of an electrician, however it still manufacturers some tools that can be pretty handy in an electrician’s tool bag.

All the tools created by Klein Tools are efficient and dependable, allowing you to expect nothing but the best for a superior performance on the job site.

The Klein Tools 85191 is one of the most popular conduit fitting and reaming screwdriver in the market at the moment. The tool comes in the unique black and green Klein color scheme, which makes it look quite stylish.

Aesthetics apart, the tool is also very functional. It has a hooded blade design that keeps hold of the tips and prevent any slipping from the screws. This can be important especially when you are trying to work on a conduit fitting that is in a narrow spacing or at an awkward angle.

The hood has been reinforced for durability and breakage resistance from impacts. The tool reams and smoothen both the inside and the outside of a conduit simultaneously, promoting productivity at work.

The handle has been cushioned for a comfortable grip, but comes with an ergonomic design for providing greater torque without much effort. The reaming blade is replaceable and can be held in place with a hex socket set screw.

All in all, the Klein Tools 85191 is one of the best options you have to work on an electrical metallic tubing.

Pros

  • Long lasting
  • Worth the extra cost
  • All functions work as specified
  • Shank Tip Width 5/16″ (8 mm) Shank Length 2-1/2″ (64 mm) Overall Length 7-1/2″ (191 mm)
  • Simultaneous reaming inside and outside
  • Klein Tools warranty
  • Made in USA

Cons

  • Cannot snap off anything too short

 


DEWALT Impact Ready Conduit Reamer

DeWalt is an American veteran tool maker. It is one of the most respected brands in the market today and makes some exclusive tools for electricians.

For many workmen, DeWalt is the manufacturer of choice.

The DeWalt DWA2600IR is an excellent conduit reamer.

It has been engineering to quickly de-burr the EMT conduit, without having you working on it for minutes. The tool can work with various sizes, ranging from 1/2″, 3/4″, and 1″ conduit, which makes it very versatile for an average job site.

It has a one inch bit tip holder, which has been designed on the front and helps in tightening fittings even in the smallest of angles.

The conduit reamer is Impact Ready, as you would have noticed from the name of the product itself. This means that you can use it for high-torque impact drivers, right out of the box, without any configurations.

The blade can be retracted back inside the tool, which is a great add-on to the tool and gives positive points to the DeWalt engineering team. This will help protect your tool bag, or other tools inside the tool bag, from any wear or tear due to contact with the blade.

Pro:

  • Works with various sizes
  • Quick de-burring
  • Impact Ready
  • Blade retracts inside the sheath

Con:

  • Tool may not be strong enough to handle M18 2 gen tools and Dewalt 24v on high settings.

 


Klein Tools Conduit Reamer Drill Head

If you are reading this article from the start, you would know that we have already covered one Klein Tools product. Here we have another one.

Personally, I think Klein Tools conduit reamers are perhaps some of the best in the market, albeit with a higher price tag than the average.

The Klein Tools 85091 is a conduit fitting reamer drill head. It is a great choice for de-burring electrical metallic tubing.

In fact, it can ream the EMT, both internally and externally, at the same time. This makes it a very productive tool and will let you save a chunk of your time, which would be wasted in working with conduit and mounting boxes.

Moreover, you would also be safe from any wear and tear to your arm, since the tool does all the work for you. Functionality wise, it can work with reams of various sizes (1/2”, 3/4” and 1”) and can install fittings within seconds.

The tool can easily be set on a power drill chuck or quick release adapters, without requiring any specific expertise. Compared to its previous generation, the 85091 has an improved bit retention and comes with a replaceable reaming blade.

With this tool, you can easily cut conduit and install anchors without putting stress on your arms or changing tools.  It might seem like a luxury to some electricians, but given my experience with it, I will frankly state that if you are on a project with several conduit jobs, then you are going to need this tool.

Like all Klein Tools, this one is also backed with a solid warranty for any manufacturing defects or functionality problems.

Pros

  • Various reams
  • Quick fitting installation
  • Fits in drills
  • Good bit retention
  • Replaceable blade
  • Klein warranty

Cons

  • Magnetic tip doesn’t hold screws well

 


Greenlee Conduit Reaming Screwdriver

Greenlee is one of my favorite manufacturer of electrician tools. It is an American company that has been manufacturing for over two centuries, which is a testament to its quality and reliability.

The Greenlee 9753-11C is a conduit reaming screwdriver. Aesthetics wise it looks very similar to the Klein Tools reaming screwdriver we saw at the top of this list, with a green and black color scheme.

The tool is pretty good in its reaming properties and can handle both the inner and outer diameters at the same time. This makes it easier to do installations and prevents any risk of wire insulation damages. The flat blade is hooded for protection and is a great driver for EMT fittings.

The handle has appropriate marking along the side for identification. Apart from the functions, the company has also taken ergonomics of the tool in note.

It comes with a cushion grip for a comfortable grip, that itself promotes torque. Do not that the tool is not insulated and hence should not be used near live current by electricians.

Like all Greenlee conduit screwdrivers, this one also comes with a life time warranty, which reflects the manufacturer’s confidence in the making and performance of its product.

Pros

  • Handle marked
  • Hardened blade
  • Hooded, flat tip driver
  • Soft, cushioned grip
  • With a lifetime limited warranty

Cons

  • Not insulated

 


Southwire Tools Reaming Screwdriver

Southwire is one of the world’s leading developers, manufacturers, and suppliers of building wire and utility cable, as well as the tools used in their installation.

I have reviewed several of its products in other articles before. Its conduit reaming screwdriver has been one of the popular ones in the market at the time of writing.

This SDCFR screwdriver is a heavy duty tool. It has a plastic and metallic body, with a color scheme of black and gold.

The tool does not look the most visually pleasing nor has the best finishing. However, looks aside, if you are concerned about its performance at a job site, you will be more than satisfied.

The conduit reaming screwdriver can scribe metal, start screw holes and do several piercing jobs, which makes it a versatile tool to have in your tool bag.

The sizes of supported by the tool are 1/2″, 3/4″, and 1″.  Apart from the features, the tool is also convenient to hold and has a soft handle for better grip and movement.

The conduit fitting reaming screwdriver comes with a standard Southwire Tools warranty for any manufacturing defects.

Pros

  • Heavy duty
  • Multiple sizes supported
  • All drilling and punching jobs
  • Cushion grip
  • Warranty

Cons

  • Poor finishing

 


Ideal Twist-A-Nut Conduit Deburring Tool

Perhaps not as popular as the other brands I have mentioned in this article, Ideal is a pretty old manufacturer of hardware and tools.

It started in 1916 and has grown to become a successful company, with several loyal customers.

The Ideal 35-083 Twist-A-Nut is a good choice for conduit de-burring. The tool has been manufactured in USA and comes in an attractive yellow / black color scheme.

It can be used easily to ream conduits internally and externally at the same time. The sizes supported by the reamer are: 1/2″, 3/4″ and 1″. It is especially great when working with thin walled conduits.

The tip is hooded for preventing any slipping while screwing the fitting on the conduit and is also helpful in preventing any scratches by tip when the tool is in the bag. The head is interchangeable with the Ideal screwdriver shaft (sold separately), which makes this reamer very versatile on the job site.

Even more, the head can be put on a drill machine, without requiring any external accessories. The handle comes with a universal wire nut wrench design that makes the installing of twist-on connectors very easy.

All in all, this is a great tool for saving tons of time in conduit jobs at work, without sacrificing on the quality of the work.

Pros

  • Various sizes
  • Hooded tip
  • Removable head
  • Head attachable on drills
  • Universal Wire Nut wrench
  • Assembled in USA

Cons

  • Some quality control issues

 


Conclusion

Now I have reached the end of my reviews. I am sure that this article would have been helpful to you. All the products listed here are from reputable manufacturers and have great customer feedbacks. I recommend you to pick any one of them, whichever best suits your requirements.

Budget friendly Electrical Fish Tapes

There are thousands and thousands of tools for workmen that have been developed throughout the years with the brilliant minds of innovators around the world.

When you are sort of unfamiliar in the tool industry, some tool names might seem funny and confusing. A good example of it is the fish tape.

When you look at it, it doesn’t seem to be a tape. For the fish part, nothing is fishy about it, literally. However, this tool is commonly used by most electricians in the industry.

 

My Picks For Best Electrical Fish Tapes

NameMaterialLengthPrice
Greenlee SmartMARKSteel 250 feet$$
Klein Tools 56008 Fish TapeSteel 240 feet$$
Southwire Tools Fish TapePolymer (Steel and Fiberglass)240 feet$$$
Gardner Bender Fish TapeCarbon Steel250 feet$

 


Greenlee FTS438DL – 250 SmartMARK

Greenlee Textron is an industrial and tool company based in Illinois, US. Since 1862, their company expanded and a variety of tools were distributed among the tool industry.

Brilliant tool innovations were developed through time, up until now.

Greenlee Textron is proudly introducing a line of laser etched steel fish tapes with Speed Flex leaders and over moulded grip handle.

This smartMARK steel fish tape with speed flex leaders allows the user to fish farther into the electrical conduits. Through its view ports, users can easily know how far they have gone fishing.

This new model of fish tape complements Greenlee Textron’s existing line of fish tapes made out of a variety of materials with the combination of length and stiffness to finish the fishing job of every workmen, especially electricians, and hobbyists faster, safer and easier.

Pros:

  • Increased efficiency can be observed, with its laser etched foot and meter distance markings.
  • The product allows the user to fish farther with its speed flex leader.
  • It lets the user know how far he had fished, measured in both feet and meter, through its viewing ports.
  • The tape is 250 feet in length.
  • It has a rugged, advanced, no-bump, and flared comfort grip that comes with superior rapid pay out and rewind capability.
  • It is made in the USA.

Cons:

  • The tape is not made of stainless steel so it will be prone to corrosion and will get the user’s hands dirty.
  • The end is too large to fit in a ½ inch metal flex for a 30 foot wire pull.

 


Klein Tools Stainless Steel Fish Tape

Klein Tools has been one of the well-known tool companies for its production of the world’s finest tools, specifically designed to provide workmen’s labour needs from all over the world.

Klein’s 56008 Depth Finder with High Strength 1/8 inch Stainless Fish Tape measures 240 feet long and features permanent laser etched 1 foot increments on the tape, allowing the users to measure the depth of conduit runs and determine the length of the tape still left to pay out.

Durability is surely evident with the tape’s polypropylene case and handle and features shock and impact resistance. The case’s round inner ring design gives off a smooth, consistent and comfortable surface for winding and rewinding of the tape.

Its uniquely sloped handle features the optimization of the position of the user’s hand for quick hand-over-hand rewinds. This also allows a more level payout of the tape on the backswing while feeding it in the conduit.

Pros:

  • The tape has permanent laser etched 1 foot increments on it.
  • It provides accurate depth measures of conduit runs.
  • The product determines the amount of tape left to pay out.
  • Its raised finger grips allow the users to transfer 100 percent of the winding power from their hands and fingers.
  • The product’s round inner ring provides a smooth, consistent and comfortable surface for winding and rewinding.

Cons:

  • The increment numbers on the tape are small and hard to read.

 


Southwire Tools SIMpull Fish Tape

Southwire Company, Inc. is known to be the largest manufacturer of copper and aluminium rod, wire, and cable in the US. Through time, the company made technological advances that expanded the products they’re manufacturing and distributing worldwide.

Southwire’s SIMpull fish tape is made of a non-conductive polymer that gives off low coefficient of friction, allowing the tape to smoothly glide through EMT and PVC conduits with a much faster pace than steel and fibreglass fish tapes do.

SIMpull fish tapes are also virtually unbreakable and are bend resistant.

Pros:

  • The tape comes in two kinds of leader types:
    Swiveling flexible metal leader – makes the tape easily glide through EMT and PVC conduit.
    Non-conductive and glow in the dark leader – allows easy tape installation over existing wires.
  • This new line of fish tapes features nine models that provide solutions for different applications, featuring two tape diameters and various lengths.
  • The product provides faster and easier pulls with its low friction and spiral extruded polymer.
  • The tape is extremely flexible and is made of non-conductive materials, making it corrosion resistant and at the same time, durable and won’t bend, while being lighter in weight than other fish tapes.
  • The fish tape is virtually unbreakable, meaning they won’t be easily bent or broken. It’s a mere combination of the best features of fish tapes made out of steel and fibreglass materials, giving the users the strength of a steel fish tape and the non-conductivity of a fibreglass fish tape.

Cons:

  • This fish tape may only be a good use for simple applications.
  • The tape doesn’t go 100 inches through a plastic conduit with more than 2-3 sweeps, in some experiences.

 


Gardner Bender Carbon Steel Fish Tape

Gardner Bender is known as a manufacturer of tools and supplies for professional electricians. The company had expanded since 1959 and has now been manufacturing more products such as electrical tools, voltage testers, wire management products and other professional equipment.

Gardner Bender’s line of fish tapes has improved hand fishing with their first ergonomic fish tape offered in the industry. The UpperHand fish tape has an ergonomic handle that secures the user’s grip at the strongest point and enhances the productivity on the job.

Its grip also provides comfort and reduces forearm strain for users. The interior grip fits the user’s palm and reduces the number of pressure points that are common in most fish tapes.

It is highly durable as the handle and the product housing were impact modified and exceeds the 25 ft drop-test.

Pros:

  • The fish tape is highly durable as it has impact modified handle and housing.
  • It’s corrosion-resistant plated steel wire gives users the toughest and the most durable tapes, perfect for long-lasting use.
  • The tape’s ergonomic handle provides users the comfort and security that some fish tapes don’t have.

Cons:

  • The tape has way too much curl in it so it became hard to use.

 


 

What Is A Fish Tape?

A fish tape, also called “draw wire” or “electrician’s snake”, is a tool used by electricians to pull wire through walls, beneath subfloors, electrical conduit and other spaces that are difficult to reach. It is designed to be guided through confined spaces like wall cavities. A fish tape is long, thin, flat steel wound up inside a donut-shaped wheel with a sturdy handle. Because of its storage system, the tape has a natural curvature that allows the electricians to guide it through tight spaces. It is a very handy tool as it can be used for pulling wires through a pipe or putting wires from one end to another through a plumbing chase.

Fish tapes can be made from different materials, mainly these three: steel, fiberglass, and nylon.

Steel Fish Tapes

  • This fish tape made from steel is very robust, highly flexible and rigid.
  • Steel fish tapes are absolutely suited for operations that require heavy duty pulling over long distances.
  • The tape is made from steel, which has high conductivity; steel fish tapes with live conductor must be avoided.

Fiberglass Fish Tapes

  • These fiberglass tapes have a very high pressure-thrust, making it a very much preferred material for installations of telecommunication and data communication cables.
  • The thicker the fiberglass tape, the higher the pressure-thrust it has.
  • The components in fiberglass reduce the friction resistance of the tape.
  • When this tape is being used in an operation, pulling and pushing every sharp bend must be avoided as any excessive bending can tear down the tape.

Nylon Fish Tapes

  • This kind of tape is commonly and widely used because of its cost-efficiency and universal applicability.
  • It has an increased friction resistance and its wear and tear is higher than other kinds of fish tapes.
  • Nylon fish tapes are highly recommended for occasional fishing operations.

For some, fish tapes seem to be difficult to use during operation. However, proper handling, wire manipulation, and safety measures while using the tool are the key for ease of usage.

Before going to learn about how these tapes work, here are some safety tips and proper usage guidelines when using fish tapes:

  • Wear protective eyewear when feeding, pulling, and rewinding a fish tape.
  • Turn off all appliances near the fish tape during an operation.
  • Do not remove the screws on the winder reel while using the fish tape coiled in it.
  • Pick a safe and comfortable work position and spot before using the fish tape to avoid loss of balance during the feeding or pulling the tape.
  • Wear heavy duty gloves when fishing the tape as sharp edges might cut bare hands.
  • If insulation is encountered during the operation, try not to go through it, but around it with the tape.
  • For jobs near live circuits, non-conductive and non-corrosion fiberglass fish tapes are recommended.
  • Keep the tape clean by washing it with detergent and warm water as dirty tapes can be difficult to retrieve. Inspect fish tapes for corrosion, cracks, or other wear as it may lead the tape to break during pulling.

How To Buy And Use A Fish Tape?

Fish tapes mostly come in lengths of 50’ and 100’. Pressing a button or pulling a lever near the handle pulls the tape out of the wheel and releases it, allowing the user to simply pull it out of the wheel. As the tape unwinds from the wheel, the user feeds the tape into a conduit. When the tape emerges from the other end, a helper will attach the wires to the end of the tape then the tape is put back through the conduit, towing the wires with it. To wind up the tape back in the wheel, grip the center of the wheel with one hand and turn the handle with the other.

Before going to purchase a fish tape in the tool shop, make sure to check out this list. Here are the things to look out for and consider before buying a fish tape:

Quality: There’s no use of paying big bucks for a fish tape that breaks off too early and easily. What brand is it under? Where was it made from? What are the materials it’s made from? These are the questions you always have to ask yourself, especially when you’re already in the store and are about to make you next item buy from the fish tapes aisle.

Quality, together with durability, should never be out of the list you should look out for when buying just about anything, to avoid wastage of time and money.

Durability: Here comes the feature you should always look for. Durability decides how long you can use something. Sure, users are also responsible for the long lasting usage of their things, but first and foremost, the thing you’re purchasing is supposed to be heavy duty.

A durable fish tape should be shock proof, and is corrosion resistant.

Which Tape Is Which: As I mentioned in the beginning of the article, fish tapes can be made of three kinds of materials: Steel, nylon, and fiberglass.

Steel fish tapes are very rigid and flexible and are suitable for heavy duty fishing jobs. However, due to its high conductivity, operations that are near live conductors must be avoided when using this kind of fish tape.

Nylon fish tapes are the most commonly used as aside from having an increased friction resistance, these tapes are also cost-efficient and applicable to wide fishing operations.

Fiberglass fish tapes are preferred for installations of telecommunication and data communication cables. This kind of tapes is also non-conductive, making it handier for electricians to use.

Now let us look at my favorite electrical fish tapes in the market at the moment:

 

CONCLUSION

We have come to the end of the article. We hope this served as a guide for you to know more about fish tapes; what they do, how they work, and some tips about using the tapes.

Best screwdriver set – That don’t break the bank!

Whether purchasing a screwdriver set for hobby purposes or for work necessities, it is very important to get to know the qualifications or what to look for in a screwdriver.

Today, there are thousands of screwdrivers of different manufacturing companies being distributed in the marketplace.

It’s kind of hard to choose which is which, especially for electricians who don’t know their way around tools yet or have had a bad experience in selecting them previously.

However, you do not need to worry, as in this article I am going to discuss and review the best screwdriver set.

How I Made My List

Before completing my list and picks of screwdriver sets, I considered some important things to keep in mind. This should also serve as a guide to every electrician or tradesmen who’s planning to buy their next screwdriver sets.

Firstly, it’s a waste of time and money to have to make a unnecessary trip to Home Depot or the supply house to buy  yet another set of screwdrivers.

Every workman’s dream is to have tools made out of quality materials.

Quality should be the 1st trait any tradesmen should look for in a great screwdriver. They can be a little bit pricey, especially those under big brands, but you should always remember that just because something is expensive that doesn’t necessarily mean that the product will guarantee having everything it endorses.

Screwdrivers must be chrome-plated to resist corrosion. The tip of the screwdrivers should also be precision-machined for exact fitting. It should be durable and guarantees a long-lasting performance to make a workmen’s job easier.

Moreover, electricians who purchase such tools should be aware of the branding and its place of creation.

  • Have you ever wondered about the review of the tool brand of your choice?
  • How about where your tool was made?

It is highly recommended to read about the brand and the reliability of the products it manufactures. It’s better to have knowledge around tools, especially about the brand and where it was made, for it will help you decide better.

Brand names and product origins are known to be one of the good bases when picking the right tools.

Tools made from Japan, Germany, and USA are the most trusted due to their high quality manufacturing and confidence bearing warranties.

Lastly, decide whether the specifications of the screwdriver suit your work or not.

Couple of things to consider when you are making your selection:

  1. Where was the tool made?
  2. What type of material is it made from?
  3. Does the brand come with a warranty?
  4. Is the brand well know in the industry?

 

My Picks For Best Screwdriver Sets

NameTotal ScrewdriversDurabilityCorrosion ResistantPrice
Klein Screwdriver Set8HighYes$$$$
WIHA Screwdriver Set10Very HighYes$$$$
Greenlee Screwdriver Set7HighYes$$$
Milwaukee Screwdriver Set8Very HighYes$$$
Dewalt Screwdriver Set10Very HighYes$$

 


Klein Screwdriver Sets

Klein Tools has been well-known for its production of the world’s finest tools designed for the convenience of workmen in various fields of labor. Klein is almost every electrician’s go to tool. Its the most trusted brand in our industry.

From adjustable wrenches to zipper bags, the company truly has it all. Since 1857, Klein Tools produces high quality, heavy duty, and world class tools and that is why it is one of the go-to tool shops of workmen from all over the world.

Klein can be found in every electrical supply house, but we have found the best prices can be found on line through amazon. Also, amazon has free 2 day shipping when you sign up for prime membership.

Klein’s 85078 Cushion-Grip Screwdriver set is one of the most frequently used screwdrivers. The set includes eight screwdrivers – two cabinet-tip, two keystone-tip and four Phillips-tip screwdrivers. It contains Klein part numbers 600-1, 601-3, 600-4, 602-6, 603-1, 603-3, 603-4, and 603-6 with a reusable plastic container.

High quality is guaranteed as the product is under a brand that is widely popular in the tool industry. Tradesmen won’t have a hard time turning the screwdriver’s knob with its cushion-grip handle that is sure to improve and give greater torque and comfort.

The screwdriver set is highly durable with its internal flanges inside its handle to provide solid and twist-resistant anchor.

The set is also premium chrome-plated for smoother feel and protection against corrosion. Each screwdriver has a special heat-treated shaft and precision-machined tip for exact fitting. The set meets and/or exceeds applicable ASME / ANSE specifications and Patented Tip-Ident quickly identifies the type and tip orientation of the screwdriver.

Pros:

  • High Quality
  • Heavy Duty
  • Guaranteed Durability
  • Comfortable Grip
  • Variations of Screwdrivers for Multiple Work Needs
  • Premium Chrome-Plated and Corrosion Resistant
  • Made in the USA

Cons:

  • The screwdriver set is not insulated and will not protect users from electric shock.
  • It is a little bit pricey compared to other brands.

 


 

WIHA Insulated Screwdriver Set

WIHA Tools is a manufacturer of hand tools based in Germany. In 1939, the company was founded by Willi Hahn who named it with his initials.

The company lists 3500 different tools ranging from measuring tools to screwdrivers. Screwdrivers manufactured by WIHA are famous among technicians, electricians, contractors or people in the field because of its precision machining.

True to its brand and name, the WIHA 32093 Slotted and Phillips Insulated Screwdriver Set consist of 10 insulated screwdrivers.

Apparently, every WIHA tool is individually tested to 10 000 volts and rated to 1000 volts AC (Alternate Current) or 1500 volts DC (Direct Current). Workmen, especially electricians, will benefit to this set’s feature as it is a big plus when doing a job in the workshop or in their work, in general.

Tired of twisting and turning with your screwdriver for so long to do or undo the screws? This WIHA insulated screwdriver set has a solid moulded core with a soft outer cushion grip that improves the screwdriver’s torque for 40% more than conventional handles.

With its soft finish handle, users will get the comfort that they want while not having a hard time twisting the screwdriver.

WIHA screwdrivers guarantee full satisfaction to its users and that’s what people are mostly looking for: the satisfaction of buying an item that guarantees them the advantages being announced during endorsements.

The screwdriver set is of high quality and heavy duty for its long lasting use and service.

Each of the set’s screwdrivers is made of CVM (Chrome Vanadium Molybdenum) tool steel and hardened to average 58/60 RC for wear resistance.

Pros:

  • Made in Germany
  • Highly durable
  • High quality and heavy duty
  • Insulated
  • Hardened steel blade
  • Precision machining
  • Guaranteed customer satisfaction

Cons:

  • The tool is made in Germany so the sizing is fitted more likely toward the Euro.

 


Greenlee  Screwdriver Set

Greenlee Textron is an industrial and tool company based in Illinois, US. Founded in 1862, the Greenlee Brothers (Robert and Ralph) manufactured their invention which is a drill surrounded by four chisel blades to be used in the furniture industry.

From there, the company expanded and handled more tools to be distributed in the tool industries. The company makes sure that they manufacture the best tools in the market, one of which is screwdrivers.

The Greenlee 0153-02C Screwdriver Set consists of seven pieces of screwdrivers – three cabinet tip, two keystone tip and two Phillips tip screwdrivers, all in varying dimensions. All in good condition for different types of work required.

Durability and longer customer satisfaction is sure to be proven with the screwdriver set’s heavy duty construction for long life and usage. Each of the screwdrivers has strong, durable and black phosphate tips that prevent plate chipping and reduce slipping. It is also chrome-plated, making it rust resistant.

Convenience is quite evident with its precision-machined tip that surely helps users to make their job easier as it is accurate based on fastener contact.

Turning screwdrivers made easy with its soft and cushioned grip designed for more comfort and improved torque. It also guarantees easy screwdriver identification of size, type, and length with its handle mark.

 

Pros:

  • Made of high quality materials for heavy duty performance.
  • The tool itself is high quality.
  • It has cushioned grip for more comfort and increased torque.
  • Made in the USA
  • The tools are actually designed to last long.
  • It exceeds ASME /ANSI specifications.
  • It has accurate fastener contact because of the precision machining made.
  • Greenlee Textron guarantees lifetime limited warranty.
  • Handle marked for easy identification.

Cons:

  • The screwdrivers are not insulated.

 


Milwaukee Screwdriver Set

The Milwaukee Electric Tool Corporation manufactures a number of tools, from cordless power tools to screwdrivers.

The corporation was established in 1924 and has since then distributed numerous of various products worldwide. Their screwdrivers are known to be durable and long lasting.

The Milwaukee 48-22-2018 8-Piece Screwdriver Set is a combination of durability and ease of use with its square recess.

The set includes two Phillips, two slotted, two cabinet, and two ECX screwdrivers. Electricians will benefit with this tool a lot as the Phillips and ECX screwdrivers include wire strippers and loop makers for faster electrical work.

Durability is evident with the slotted screwdrivers’ metal-capped ends for protection against hammer blows. It is also very convenient to use as the set’s cabinet screwdrivers have think profiles for easier access to tight spaces.

Pros:

  •  Made in the USA.
  •  The set is made of high quality materials.
  •  The brand is famous to have positive feedbacks from clients.
  •  The set includes 8 screwdrivers of varying designs for wider projects to handle.
  •  Each of the drivers in the set is marked on top for fast identification.
  •  Ease of access for users as the cabinet-tipped screwdrivers were designed to have thin profiles for tight spaces.
  •  It features hardened tips and forged shanks.
  •  The Wrench Ready HEX shanks deliver more leverage.
  •  The tool has a limited lifetime warranty.

Cons:

  • The black tip scrapes off.

 


DEWALT Screwdriver Set

DeWalt is an American manufacturing brand based in Maryland, USA and founded in 1924. The brand is known to produce power tools and hand tools for construction, manufacturing and woodworking industries.

The DEWALT DWHT62513 10-Piece Screwdriver Set includes four slotted tip, one cabinet tip, and five Phillips tip screwdrivers with color-coded handles for easier selection. More comfort and greater torque are brought to serve the workmen with its bi-material quad-lobe handle.

The set contains tools that have been ergonomically designed for maximum efficiency, user comfort and convenience.

Each screwdriver in the set has precision machined and sand-blasted tips and is equipped with magnetic tips to hold the screws in place when in use and that it fits well in the fasteners. Its lacquer coated bar also resists rust so it can provide long lasting use.

Pros:

  •  Each driver has a magnetic tip to hold the screws in place for easier fastening.
  •  The screwdrivers are slip-resistant as the grips are rubber and this increases the user’s comfort.
  • Its lacquer coated bar protects the tool against corrosion.
  •  The handles are color-coded for easy selection from the tool box.
  •  The set has an ergonomically designed quad-lobular handle design for improved and greater torque.
  •  Each of the screwdrivers’ tips is precision machined and sand blasted to resist slip out.

Cons:

  • The magnetic tips are not strong enough.
  • The tip easily breaks off

 


CONCLUSION

This is the end of the screwdriver sets review. Hopefully, this article helped and guided you to learn new things about screwdriver sets and have an idea of what the market offers. In general, invest in high-quality tools, even if they are a bit more expensive because they last for several years and eventually make up for their high price.

 

Best Electrician Backpack

As an electrician, you would know the importance of having a reliable backpack. From carrying tools from one gig to another to climbing ladders and utilizing your tools on the go, a backpack comes in very handy.

A backpack, here recently, has become an important part for electricians to add to their tool list.

Compared to electrician tool bags, It has become an easier way to transport large amounts of tools.

However, with so many backpacks available in the market how do you find the best electrician back pack?

I know, this can be overwhelming to consider, especially if you do not know what to consider while making your purchase.

No worries though. As always, I have already done the hard work in research and surveying the market, and have reviewed the best electrician backpacks in the below sections.

How I Made My List

What features make up a great electrician back pack and how to shortlist back packs based on those features? These were the questions I had to answer to make up a successful list of high quality backpacks for electricians.

To ensure that my list was not biased, I laid down a few rules and only selected the products that fully followed those rules.

The paramount feature I looked for in a bag was durability and water resistance. A tool bag must be made out of heavy duty fabric and quality stitching.

You do not want to find yourself picking up the tools that have fallen from a torn bag. Water resistance is necessary to keep your tools protected as you work through the rain.

My second priority was to pick out back packs that had good internal organization and layout. You want your tools to be set up for quick access and stored in safely. If you are constantly fiddling to find that screwdriver or hand tool, your productivity and concentration are affected.

Having quick access to your tools also mean that the bag should have an easy and spacious opening. There are some back packs with a big loop opening while others have zippers.

Lastly, carrying heavy weight throughout the day can be taxing on your body. Your tool bag should be comfortable and ergonomic. Usually, the best back packs come with padded straps and handles and a proportional weight distribution.

All the back packs in my list follow the properties I have listed above. Furthermore, I have made sure that these have a great customer feedback track record and a solid reputation in the online \ offline market.

My Picks For The Best Electrician Back Pack

 

Klein Tools Tradesman Pro Organizer Backpack

Klein Tools is always considered as the producer of quality tools for electricians. Klein Tools 55421BP-14 Tradesman Pro Organizer Backpack is made with the Ballistic Weave material that is durable and lighter in weight.

It contains 39 pockets so that you can store the army of tools and can benefit from the accessibility of your tools.  This electrician backpack comes with the size of 14.5 inches length, 20 inches height, and 7.25 inches height that ensures that you can comfortably carry it on your back and can carry large tools and a good amount of electrical material.

The bag has reinforced stitching and sturdy zippers. It has also got an appealing Klein trademark color scheme. It has the orange background and black pockets, so it becomes easy for you to identify the tools inside it.

The pockets are also very reasonable that give you the ample space for carrying pliers, razor knife, screwdriver, digital multimeter and other tools. It contains small front zipper where you can carry small parts and tools and side pencil pocket as well.

It also has sneaker like fully molded bottom that lets you protect it from the muddy dirt and elements. It stays 1.5 inches on the ground that ensures you that the sensitive tools inside the bag will not get any seepage and will stay safe.  It also has well-padded shoulder straps and handles that allow you to manhandle the bag easily.

Pros:

  • Pockets with different sizes to carry different types of tools
  • Plenty of pockets
  • Shoulder straps as well as the handle
  • Interior color gives quick visibility to tools

Cons:

  • Bottom of the bag is made up of plastic rather than rubber. Therefore, it might not be as sturdy and durable
  • Not water proof

Hence, the Klein Tool Backpack is a pretty good choice that enables you to carry the tools easily during your daily work.

 


Milwaukee Jobsite Backpack

The Milwaukee Jobsite backpack is designed for the professional tradesmen.  Besides the ample space to carry a bunch of tools, it also allows you to carry laptop and camera as well.  This backpack is very popular among the professionals because it speaks of quality, durability, and style.

It has 35 pockets that let you carry a ton of tools in an organized manner. As a technician, its important to be able to find the tools you need efficiently ; therefore, this electrician backpack helps you to manage your tools and find them easily in their designed pockets. It has both smaller and larger pockets so that the tools can fit according to their sizes. Therefore the structure of the bag provides the great benefit to the professionals

This backpack is made up of ballistic material that makes it soft and durable, and you can comfortably carry it on your back. On the interior side, it contains the multiple pockets while at the external side, two large pockets are present. One pocket can stretch and can hold a water bottle. The other pocket contains a pair of small pockets and hence enables you to keep writing materials or single handle tools. Non-stretching straps are present at the back that enables you to carry tools with clips there. Storage pocket with zipping is also there where you can store the frequently used tool.

The backpack has a very comfortable design with the pads and strips that allow you to carry the adequate weight easily. The chest buckle also helps in balancing and remarkably redistributing the weight.

Pros:

  • Numerous pockets
  • Solid base that supports the bag to stand vertically
  • Provides adequate storage space
  • Lockable and durable
  • Professional outlook

Cons:

  • Inelastic or too small side pockets
  • Size is little smaller
  • Not water resistant

The Milwaukee  Jobsite Backpack is a fantastic product that is highly recommended for the professionals looking for the solution to carry to carry their hand tools and laptops.

 


DEWALT Lighted Tool Backpack Bag

 

The DEWALT has offered a handy and sturdy choice to its customers. DEWALT Lighted Tool Backpack Bag comes with some attractive features for the electricians who have to manage a number of tools at their work.

The unique characteristic of the bag is that it comes with the LED light that enables you to illuminate the work area or even into the backpack so that you can easily identify the parts and tools.  It contains three levels of light output that enable you to have wide area illumination.

The backpack has a very attractive structure and design. It has 48 pockets inside the bag that can be used to carry multiple tools. Nine pockets are also present outside that help you in productively organizing your tools and parts. It has different sized pockets so that you can easily place tools with different sizes and find them quickly at the time of need.

The length of the bag is 15.5 inches, width 8 inches, and height 9 inches that give you the sufficient space to carry the tools and parts. This electrician backpack has also got the large external pads with the soft shoulder straps and padded handles that help in the additional comfort. This also helps you in distributing the load evenly and hence saves you from getting strained or back pain. It also has high-quality stitching and is made with the top notched material that makes backpack durable.

Pros:

  • LED light that helps in illuminating the workplace or identifying parts and tools
  • Padded web
  • Adjustable straps
  • Numerous pockets

Cons:

  • Bag is made in China and hence has quality problems
  • Customers are seen complaining about the light

Hence, The DEWALT DGL523 Lighted Tool Backpack bag allows you to store anything in it and is also very competitive and hence makes a tough choice when making a backpack purchase.

 


Custom LeatherCraft Tool Backpack

Custom Leather Craft (CLC) needs no introduction to the professionals, including electricians. This is a premium brand that makes top of the line products, with a long lifetime and a solid warranty to back them up.

The CLC 1132 back pack comes in an all-black color scheme, with the yellow logo of the brand stitched on the front. The bag is made from ballistic poly fabric, which will take lots of wears and tears but will not give away.

The bag is quite spacious inside and has a well-planned layout. There are seventy-five pockets (big and small), to hold all kinds of tools, without ever worrying about running out of space. In fact, for most cases, electricians would never require to even use all the pockets, unless you are doing heavy commercial and residential work on different job sites.

There are tool slots for different types in the front, where you can easily keep your wrenches, drills, side cutters, strippers, pliers and more in an organized manner, with quick access at the time of need.

There is a plastic tray embedded to divide the bag into compartments and keep your respective tools and accessories from mingling with each other. With a size of 13 by 17-1/2 by 9 inches, the bag can store all kinds of tools, without taking up an awkward or uncomfortable shape.

Except for its functionalities, the CLC back pack is also quite ergonomic and comfortable to wear for long hours. It has a padded shoulder strap to take off the feeling of heavy weight from your shoulder, while the adjust-ability of straps allows you to wear the back pack according to your height. If you do not want to wear the bag on your shoulders, you can always carry it with the handles, which have been padded and reinforced for a secure grip.

Pros

  • Amazing Quality – tough as nails.
  • Easy portability
  • Easy to carry by hand and back.
  • Lots of compartments.
  • Reinforced stitching
  • Padded handles and shoulder straps

Cons

  • Doesn’t expand or stretch
  • Tools not easily visible

All in all, you cannot go much wrong with a CLC back pack on your back. It is a great option for electricians working in both small scale and large scale gigs.

 


Nupla Black Back Pack

Nupla is a leading manufacturer of industrial tools and accessories. It has been operating for almost a century and has stamped its position in the market as a reliable and innovative company.

The Nupla 67419 Black Label back pack is one of the most popular choices amongst electricians. There is little surprise in this since the Nupla back packs are some of the sturdiest and long lasting ones in the market.

The 67419 Black Label is made from a ballistic nylon material, which is of the same standard as used for making gears for the military.

The material has been double stitched for reinforced durability and longer life. In fact, with the fabric being 20% heavier than the usual hardware bag fabrics, this bag can easily take on impacts, falls and pulls, without any visible wears or tears.

The seams of the bag have been stressed for added strength and double walled to prevent from tearing out and eventually losing their stitching. The shoulder straps are breathable for added comfort, while chest straps have been added for security. The bottom has a layer of rubber for preventing water penetration.

There are two large pockets and several small pockets on the bag. However, if you want to keep your tools organized, you may find yourself searching for a better layout inside the bag. For the most part, you can easily carry a heavy load of large and small tools in this bag, as you move from job site to job site.

Pros

  • Ballistic nylon
  • Reinforced stitching and seam
  • Rubber base
  • Breathable straps
  • Nupla warranty

Cons

  • Lack of organized pockets

All in all, this Nupla back pack is a great heavy duty product and will last you for several years.

 


Conclusion

Now I have reached the end of my reviews. I am sure that by now you would have a good idea of what a good back pack is and which one to choose. At the end of the day, your choice depends on your requirements and your budget. You can pick any of the products I have listed and have complete confidence in their functionality and longevity.

Best Electrician Tool Bag

An electrician tool bag may seem like a luxury, but, in fact, it is one of the necessities for an electrician.

A tool bag allows you to carry tools to the job site that you may note use all the time.

Most of your hand tools will be on your tool belt.

Carry a bag when you want to have quick access to tools you may not use all the time for example: hammers, roto split, knock out set, and so on just to name a couple of the larger tools.

Who Needs an Electrician Tool Bag

All electricians are recommended to have a tool bag. While the size and the style may vary, depending on whether you are doing a small scale or a large scale job, the fact is that it is quite easy to misplace or forget your tools and with a tool bag, you can easily prevent this problem from ever arising.

Now you might be wondering how to shop for a tool bag. You are not the only one. With the variety of products available in the market it is quite easy to get confused while selecting a tool bag for yourself.

There are some inexpensive ones, while others charge you a premium.

Some have room for extra tools, while others don’t have pockets. There are too many things to consider, especially if it is the first time you are considering to buy a tool bag,

How Did I Pick the Electrician Tool Bags in My List

Well, with regards to an electrician tool bag, most come with the standard options you might expect. There are a few that stand apart from the competition.

I made a short list of products by choosing the highest rated tool bags on online and offline market places.

What I looked for in the shortlisted products was durability, comfort, spaciousness and convenience.

A durable tool bag will keep your tools protected from impacts, resist wearing from heat and corrosion from water.

Similarly, a comfortable tool bag will make it easy for you to carry it around due to the extra padding in shoulder strapping and handles.

Spaciousness is again important, depending upon your job type, as some electricians use large tools which need large space, while others usually work with small sized tools and hence require smaller space.

Lastly, you want your tool bag to be convenient when carrying and using. Your tool bag should not feel like a burden as you move from job to job.

While these are the main properties which I looked for in my tool bags, I chose to eliminate any tool bags, from my short list, which had poor customer feedback. This allowed me to remove any chances of listing a bad product. After thorough research and surveying, I ended up picking 6 products which I feel are superior from the rest.

My Best Electrician Tool Bag Picks

NamePocketsComfortSizePriceRating
Custom LeatherCraft 152916High 9 x 16 x 9 inchesLow4.4/5.0
Dewalt Tool Bag23High10.5 x 8.5 x 10 inchesModerate4.5/5.0
Klein Tools Bag78Medium20 x 14 x 11 inchesHigh4.3/5.0
Custom LeatherCraft 153950High18 x 14 x 7 inchesModerate4.7/5.0
Milwaukee tool bag50Okay12.9 x 12.6 x 3.3 inchesLow4.4/5.0
Husky 18 Inch Tool Bag18Okay18 x 8 x 6 inchesModerate4.1/5.0

 


Custom LeatherCraft 1529 16-Pocket, 16-Inch Center Tray Tool Bag

Customer Leather Craft (CLC) is a premium brand for professional wear, like gloves, boots and, of course, tool bags.

The 1529 electrician tool bag is a rugged and spacious tool bag, that is going make it super easy for you to move from one job to another, without packing / unpacking your tools every time.

The bag is made from polyester fabric and is bound to resist heat, water and dust, without showing any signs of wearing.

The size of the bag allows you to put all your tools in one place, but the design ensures that the bag does not feel too big to carry around with you. It has a 16 inch center tray, 8 pockets inside and 8 pockets outside to keep your tools organized and easy to access.

The tools are well protected with extra padding around the exterior, while the shoulder pad is adjustable to let you carry the bag in a position most comfortable for you. Put in your wrenches, pliers, testers, screwdrivers and all other accessories (large and small), and get working!

Pros

  • Durable and stylish
  • Import quality
  • 10 x 10 x 14
  • Multi-compartment
  • Plastic tray included
  • 8 Pockets outside and 8 inside
  • Extra padding
    Adjustable shoulder strap

Cons

  • No tape loop
  • Net pockets non elastic
  • Zipper quality could be improved

 


DEWALT Electrical and Maintenance Tool Carrier

Next, we have the good old DeWalt, a trusted name in the world of electrical hardware and accessories, so it is no surprise that I have found one of its electrical bags for my list.

The DG5582 electrician tool bag has the trademark yellow and black color scheme, which is so symbolic of all DeWalt products.

It features dimensions of 8.5 x 10.5 x 10 inches, which is quite sufficient for keeping tools needed for medium to large scale electrical jobs.

The tool bag comes with an open top design for quick access and has a variety of storage options to keep your accessories: 23 pockets, 1 plastic tray, tape clip, wire strap and more!

The bag comes padded externally for extra durability and protection. It has an adjustable and non-slip shoulder strap for your convenience and comfort.  Expect it to last for several years and become your partner at work.

Pros

  • Adjustable, non-slip shoulder strap
  • Plastic tray
  • 23 pockets and slots
  • Open-top design
  • Measuring tape clip and strap
  • Spring clip
  • DeWalt warranty

Cons

  • Lack of sufficient small pockets
  • Top pockets not deep enough
  • Handle at the top not sturdy

 


Klein Tools Tradesman Pro Organizer Extreme Electrician’s Bag

As you would know by now, I am a fan of Klein Tools. As you can imaging, Klein is one of the leading manufactures in electrical products.

They KNOW how to design their bags to carry any electrical product you may carry.

The 554171814 Electrician Tool Bag by Klein is one of its most popular products in its range. It is preferred by all contractors not just electricians.

The bag comes in a black exterior and an orange interior, hinting the preferred color aesthetics of most Klein products. It is made from hard molded plastic frame and 1680D ballistic weave for super durability even in the most extreme conditions.

The bag comes with 78 pockets (inside and outside) to give you the ultimate luxury of keeping even your whole tool kit in it. Large or small tools, you will find no issues in storing anything.

The bag sizes 15 x 10 (W x H) and has a great interior layout, which will allow you to get your tools without fiddling for them.

The shoulder strap of the bag is adjustable and comes with padding for comfortable carrying. There are also lock bars installed on the front for securing your bag and preventing it from opening as you run from job site to job site.

Pros

  • 78 pockets
  • Ballistic weave
  • Shoulder strap with padding
  • Handles
  • Lock bars
  • Fully molded plastic frame

Cons

  • Heavy
  • Made in China (Advertised as made in America)
  • No long and wide pockets

 


Custom LeatherCraft Multi-Compartment 50 Pocket Tool Bag

It is no surprise that I have added another CLC Electrician Tool Bag as my number fourth pick in this list. There are just too many quality products from this manufacturer to only pick one.

The 1539 Electrician Tool Bag is a larger cousin of the previously reviewed CLC bag. It has a multi compartment layout and can become your ultimate tool carrier.

The inner compartments can easily store larger and smaller tools alike, with 18 pockets for an organized storage. There is even a large carabiner and a tape clip, along with long vertical pockets. On the outside of the bag, you will find seven pockets for your most commonly used units.

The bag is made from durable heavy duty polymer material, with a ballistic trimming, to ensure that it can bear the afflictions of an electrician’s job. The zippers are doubled for secure storage, while the shoulder straps have been padded for comfort. The handle is heavy duty in nature and gives a reliable grip. Overall, this is an excellent tool storage solution for professionals.

Pros

  • Multiple pockets
  • Vertical tool pockets
  • Spacious center compartment
  • Side zipper
  • Exterior compartments

Cons

  • Not water resistant
  • No tape loop
  • Elastic loops are poor in quality
  • Net pockets inelastic in nature

 


Milwaukee  50 Pocket Bucket-Less Tool Organizer

Milwaukee is a popular American hardware and accessories producer. I have reviewed several of Milwaukee’s products and have found them all to be of super quality compared to their average counterparts.

The Miwaukee Electrician Tool Bag is a top notch utility tool carrier. It comes with 50 pockets of various shapes and sizes (inside and outside) to give you the ultimate luxury of organizing your units exactly the way you want.

You may arrange your tools with respect to size or usage or in any other arrangement, since there the bag is quite versatile.

The pockets have been lined with ballistic threading and have an overall external padding for complete safety of your tools. There is even a hammer loop with quick access.

The exterior of the bag is made from heavy duty polyester. The material can tolerate water and heat, without showing any strains. It is rip resistant, meaning that you will never find your tools falling off the bag while going to a job site. The bottom has been molded with a hard shell for excellent support and greater protection.

The handle has been padded for giving comfort, even when the bag has several heavy tools in it.

Pros

  • 9 x 12.6 x 3.3 inches
  • Ample storage
  • 50 total pockets
  • Heavy-duty water resistant
  • Rip resistant
  • Padded handles
  • Internal hammer loop

Cons

  • Small in size

 


Husky 18 in. Large Mouth Bag

Husky is perhaps a brand that you would have not seen much on my website. It is not an electrician focused manufacturer nor is it a producer of hardware products.

The Husky 18 electrician tool bag is a basic version and I thought it would make a good addition to my list, since not every electrician is looking for a top of the line bag, with tons of features.

The Husky 18 comes in a red and black color scheme. It is made from a polyester and resin compound, which enables the bag to be soft but durable, as well as slightly resistant to water (don’t expect it to save your tools in rain). The bag has a large mouth and can be used to keep several tools at once.

There are only 8 pockets inside, so do not expect to keep all your things organized. I would recommend to use it if you are doing domestic or small scale jobs. There are 10 pouches on the exterior of the bag for keeping some of your most used units.

The handles of the bag are reinforced to give better grip and security. The shoulder strap is quite simple compared to the ones found on some of the products above.

Pros

  • Basic
  • Easy to use
  • 6 pouches in 5 pockets out
  • Water resistant
  • Super durable

Cons

  • Lack of sufficient pockets
  • Tools are usually kept in unorganized fashion

 


Conclusion

There is a huge variety of electrician tool bags in the market. They come in different colors, styles and sizes. While I am not saying that my list is exhaustive, I am sure that it covers all kinds of styles and features available in the market and gives you the most superior products to choose from.

Electrician tool bags make transportation of your tools very convenient and easy. You can move from job to job, without worrying about losing your tools or organizing them again and again. Get one which suits your requirement perfectly and start looking forward to your work every day!

Best Ratcheting Cable Cutter

A ratcheting cable cutter is one of the primary tools in the tool box of any electrician. It allows you to cut through multiple cables leaving a clean and smooth cut. These are ideal for cutting through 1/0 and greater.

When I started to do some leisure projects as an electrician for the first time, I was surprised by the importance of this tool. Indeed, now it has become one of the primary tools in my armory.

However, the thing about cable cutters is that they come in many types and may be specialized for some projects.

With all the shapes, sizes and capabilities for executing job involving copper, aluminum, telecommunication, TV and other types of wires, it can be difficult for you to select a good ratcheting cable cutter.

To help you with the selection, I am going to review the top ratcheting cable cutters for a regular electrician in this article.

Why Should You Buy A Ratcheting Cable Cutter

A ratcheting cable cutter allows you to cut wires accurately and cleanly, without finding yourself to improvise by using tools like a sawzaw or hacksaw.

Any electrician who is doing projects that require 1/0 wire and greater should make sure to keep with them a ratcheting cable cutter. I do not recommended caring it on your tool belt but keep it in your tool bag ready to be used.

Other than doing the job effectively, the cable cutter is also efficient and will save you tons of time in the long run.

How I Selected The Ratcheting Cable Cutters For My List

Now as you would well know by now, selecting a ratcheting cable cutters not easy. There are so many options in the market that are great choices. To save you time a the heart ache of research, I have done all the recon myself and created a list of cutters for you to review.

Well, not many electricians have the luxury of time to find the best ratcheting cable cutter for themselves.

To help such electricians, I decided to spend some time researching and reviewing the best products in the market at this time. Now, for starters, I decided to eliminate any products that have a poor performance rating or a below standard customer feedback. Why? Because I am looking for the top most products and hence these products would never make the cut anyways.

Now I was left with a much shorter list of ratcheting cable cutters that were good in their functionality and had credible feedback from previous customers.

Of course, this list was still longer than what I desired.

Now I laid down some specifications to base my further short listing on. The things I focused on were blade quality, cutting ability, steps in cutting and ergonomics.

Blade quality was my number one priority. If the blade is not durable or wears too easily, it is not of much help for a seasoned electrician, who does several gigs in a week.

Cutting ability was my second most important deciding factor. Some ratcheting cutters may only cut a few types of wires, like copper or aluminum, while others can cut several types without any hiccups.

Thirdly, I looked for the cutting steps. Usually one step cutting is slower than two step cutting and hence I preferred cutters with the latter mechanism. Ergonomics is perhaps as important as the blade quality, since a well designed cutter will allow you to do the job more conveniently and stay focused.

So after using these specifications, I was able to further cut down on my list. The final remaining products were all excellent, so I decided to get reviews about them from electricians and vendors in the market, who would know these products to the tiniest of details.

Finally, after getting the verdicts of the professionals, I was able to make the decision of keeping four ratcheting cable cutters in my list. These are all of high quality and will cover all of your wire cutting needs.

 

My List of Best Ratcheting Cable Cutters

Name BladeNumber Of StepsWire TypeErgonomic
Greenlee CuttersHeavy Duty1Aluminum, copper, steelYes
Klein Tools CuttersReinforced2Aluminum, copperYes
Temco HD Ratcheting Cutters Black Oxide1Aluminum, copperYes
Southwire CuttersReinforced2Aluminum, copperNo

 


Greenlee 759 Compact Ratcheting Cable Cutter

Greenlee is a top American manufacturer of electrician hardware. I have found the company to be reliable and effective in nearly all product types I have reviewed so far. The ratcheting cable cutter by Greenlee is one of these products.

The tool is quite lightweight and has a thin profile, which means that it is easy to work around with (1/2 inches long, 1.4 lbs. weight). The ratcheting mechanism is of single speed and comes with a blade release capability, which means that you can open the blades during the cutting.

Despite the compact size, there has been no sacrifice in the blade quality or strength. The blade is heavy duty in nature and can easily cut aluminum, copper and steel wires (aluminum (400.000 SQ-MM) steel (28.000 SQ-MM), copper (240.000 SQ-MM).), without wearing out quickly.

While it is excellent in its functionality, Greenlee has made sure that the ergonomics and design of this ratcheting cable cutter is also of superior nature. Being thinner and smaller than the standard cutters mean that you get more leverage and can easily use the tool in tight spots.

You can also easily store the cutter in your tool pouch, while working on site. Since only one hand is required to operate the tool, you can also switch between your hands and prevent cramps from developing.

Pros

  • Compact And Convenient
  • Single Speed
  • Blade Release Allowed
  • Heavy Duty Blades
  • Ergonomic Design

Cons

  • Not best for usage with steel

Klein Tools 63060 Ratcheting Cable Cutter

Every electrician knows that Klein Tools is an ideal manufacturer, which makes its hardware to be most compatible and most convenient to electricians all around the world. The manufacturer has been operating in American for over two centuries and has cemented its place as an authority when it comes to dealing with electrician’s hardware.

The 63060 by Klein Tools is another quality product. It can be used for cutting through copper (600 MCM) and aluminum (750 MCM) wires.

Klein has enabled a hold open function that allows you to do fast cutting, while a quick release lever lets you open the blade during the cutting itself for the removal of cable. The ratcheting mechanism involves two steps and has been developed using a patented Klein technology, which allows you to get the same cut using fewer strokes as compared to an ordinary ratcheting cable cutter.

The blades have been reinforced with steel for greater strength and more durability, giving you the confidence to use them even for the toughest jobs. Klein Tools has also improved the cutting capacity of this tool, compared to its previous generations, which gives you a greater overall yield.

Design wise, the company has ensured that you can work with this ratcheting cable cutter for long hours. The special grip on the cutter gives you more leverage and requires reduced force for doing the job.

Pros

  • Cutting Copper and Aluminum Cable
  • Ergonomic
  • Reinforced Blade
  • Quick Release Lever
  • Hold Open Function

Cons

  • May Take Time To Get Used To Its Cutting Speed
  • Cutting Blade Can Be Difficult To Rotate

 


 

Temco HD Ratcheting Wire & Cable Cutter

Temco is another American brand in our list. It has been operating for over 5 decades and has been successfully delivering high quality and innovative product lines.

The Tempco TH0036 ratcheting cable cutter can be used to cut aluminum (1000 MCM) and copper (750 mcm) wires. It is a compact tool with a thin body, but can easily take big cutting jobs.

The blades have a black oxide layer and have been tempered and sheared before being attached to the tool, enabling them to be durable and strong while facing tough wires. You can open the blades during cutting, if you need to.

The handles have been coated with rubber for maximum comfort and grip while operating, while the telescope style gives you more control, especially while working in tight spaces. You will get great precision while using this tool and a super aligned cutting action, because of the ball dents on the handles.

If you need to do a small job, you can even collapse the handles and use the ratcheting cable cutter single handedly.

Pros

  • Handle Locking Mechanism
  • Cuts Coarse-Strand Copper & Aluminum Cables
  • Telescoping Steel Handle
  • Can Be Used One-Handedly
  • Blades Can Be Opened Mid-Cycle

Cons

  • Grip may be big for some hands
  • Lock may go flimsy

 


 

Southwire Tools & Equipment CCPR400 Ratcheting Cable Cutter

Southwire is a leading manufacturer of industrial tools and equipment. Its ratcheting cable cutter is one of the best I have found in the market and makes up our last product in this list.

The CCPR400 can cut both copper (750 KCMIL) and aluminum (1000 KCMIL) wires. This makes it useful for most electricians, especially those working in small capacity.

The Southwire cutter has a hardened blade, made from steel, to cut through wires smoothly. The rounded blade design keeps the tool in alignment and prevents distortion while you cut the wires. The cutter has a two step mechanism, which will half your strokes per cut as compared to a single step cutter.

The quick lever release will let the blades open during the cutting process without any hassle. Aesthetics wise, the cutter has a yellow and black color scheme (reminds of DeWalt’s color scheme!) and a straight handle. It is a convenient tool but has nothing special in its ergonomics.

Pros

  • Hardened Steel Blades
  • Replaceable Blades
  • Copper And Aluminum Cutter
  • Quick Release Lever

Cons

  • Out of stock regularly

 

 

Conclusion

I have wrapped up with my list of picks for the best ratcheting cable cutters. Now, while this list is no exhaustive, it does give you a quick access to some of the best cable cutters I have come across and used myself. Remember that not all ratcheting cable cutters have the same capabilities or ability to handle heavy work load. You should pick one of the options which fits your requirements optimally.

 

Best Torpedo Level for Electricians

A torpedo level is one of many sorts of levels that are intended to make it simple for electricians to work in tight spaces by having both of their hands-free.

Its also and essential electrical tool in every electrician’s arsenal.

Named for its long and thin body, which looks like a real torpedo, this level is more advantageous than an ordinary level as its body size and features allow an electrician to measure up to four angles at one try!

There is an assortment of torpedo levels from various manufacturers in the market. If you are an electrician and you are looking for a torpedo level, you may feel overwhelmed  with the choices you have to pick from.

For your convenience, I have done the hard part i.e. research the market and review the top products. In the below sections, I am going to discuss some of the best torpedo levels available.

How I Made My Selection

Obviously, with such a variety of torpedo levels in the market, selecting only a couple can be difficult. Torpedo levels come in various designs and with different sets of features, yet they are comprised of some key components.

To guarantee that my list is unprejudiced, I recorded these key properties and shortlisted just those items that gave the best blend of those properties:

 

  • Leveling Function: Most torpedo levels utilize vials to demonstrate whether the surface is level. Most levels have no less than three vials, including one to demonstrate that something is on a flat plane level, one to show that it is vertically level, or one to demonstrate that it is adjusted to forty-five degrees. A level with four vials may likewise have a vial to demonstrate thirty degrees measurement. Also, some torpedo levels may have a laser leveling capacity incorporated with them.

 

  • Glow Material: Since torpedo levels are frequently utilized as in tight and dark places, many are outfitted with an element that lights up the vials. A battery is usually used to fuel the light, which is mostly a set of LEDs. There are also glow in the dark vials that allow you to take readings without using a torch or putting a battery in your level.

 

  • Working Edge: A working edge is the side of the level that is frequently put to a surface to help level it. Many torpedo levels may have a V-molded notch along the working edge that adjusts the instrument against the pipe and keeps it stable. Furthermore, torpedo levels frequently utilize a magnetic edge also, which is good if you are working with metals.

 

  • Level Construction: While picking a torpedo level, electricians ought to consider the material used to make its body. Plastic, specifically ABS plastic, is an effortlessly reasonable choice, yet if you are an involved in heavy-duty jobs, a metallic body should be a better option.

 

Numerous producers now offer computerized torpedo levels. These models utilize a digital interface to demonstrate exact edge estimations and are a good choice if you need perfect measurements.

These are the properties that I have used to rank the torpedo levels and eventually used that to come up with my list of the best choices.

After making my ranking, I also checked what the previous buyers’ experience regarding the use of a particular product was like and how was the customer support they got from the manufacturer.

I eliminated the products with poor feedback from the customers and narrowed down my list. For the final round of elimination, I requested several vendors and professional electricians in my area to test out the products and give me their feedback. Since the professionals have a great knowledge of tools, they were able to tell me exactly if there was any shortcoming in any of the products I picked and this allowed me to remove them.

After all the surveying and elimination, I was left with four quality torpedo levels and I am going to review them in detail below.

Top Torpedo Levels 2017

NamePriceVialsIlluminationV Groove + MagneticRating
Greenlee L107 LevelExpensive4Glow4.0/5.0
Klein ToolsLevelModerate4LED + Glow4.7/5.0
Empire LevelModerate4(3 + VARI-pitch)Glow4.1/5.0
Swanson LevelCheap4LED + Glow4.3/5.0

 


Greenlee L107 Level

Greenlee has been a reputed brand amongst the electricians since its inception in 1950. It’s L107 torpedo level is a professional grade device, produced under state of the art facilities and passed through a strict quality test.

Leveling Function:

The GreenLee L107 is a tool for professional electricians. It comes with a set of four vials: plumb, level, 30 and 45 degrees. The vials have been built to high manufacturing standards, while the design allows you to view them from the top as well as other angles, without breaking your position while doing a job.

Glow Material:

The liquid inside the torpedo level vial glows in the dark and hence you can work with it in low light conditions. However, it is not recommended to be used in complete darkness as it does not have a light in it.

Working Edge:

This comes with a V groove edge that allows you to put it on curved surfaces and the placement of the V groove on top means that you can also view your vials easily. There are four rare earth magnets on the edge that will let you put the level on any ferrous surface and continue doing your job, without finding yourself a hand short.

Level Construction:

This device is super rugged and will last you for a long time. The body is made from aircraft classified aluminum, which can easily take some beating without breaking. The level is also water resistant and will allow you to work in wet conditions.

Pros

  • Built Like A Tank
  • Strong Magnets
  • 4 Vials
  • V Groove
  • Compact

Cons

  • Size Of The Actual Bubbles Smaller Than Alternatives
  • Half Moon Cut Design Disturbs Stability

Klein Tools 935RB

Klein Tools is very popular amongst electricians because of its high quality and innovative products. While the

manufacturer isn’t the first one to produce a torpedo billet level, but its product is definitely one of the best in the market at the moment. The 935RB is a very precise and accurate device that will save you a lot of time and from making errors.

Leveling Function:

There are four vials included in this torpedo level, each for plumb, level, 30 and 45 degrees angles. The vials are pretty easy to read, with large prints, allowing even people with poor eye sight to work with the level pleasantly. All vials work perfectly and are deadly accurate. The top view windows are pretty nice and will make you more efficient during your job.

Glow Material:

Klein Tools has made sure that as an electrician you face no difficulty in working with this tool, even when you are in a tight and dark spot. The body of this level is made from anodized aluminum, which allows the orange color to be seen easily in low light. The vials have a lighting capacity and a unique shut down feature. The lightening quality is more than sufficient for you to execute any job, without requiring a pair of torch or headlamp. The auto shutdown feature helps save the battery and is activated after 3 minutes of no use. This helps to preserve the battery, especially if the device’s lights get switched on by mistake.

Working Edge:

The level comes with a V edge for an easy fit when working on pipes and an excellent alignment. Moreover, it has rare-earth magnets laid out on its edge which prevents it from falling out and holds a secure grip even on small metallic surfaces. The rare-earth magnets are remarkably strong and hold securely with a metal strip on the bottom of the level.

Level Construction:

The body is made from aluminum and is slightly larger than an average torpedo level. Nonetheless, the quality of the construction is remarkable and the level is not going to fail on you even after suffering some falls. Moreover, the whole body is entirely water resistant so you can even work with it in humid and rainy condition.

Pros

  • Large And Bright LED
  • Locking Track
  • Easy To Read
  • Professional Grade Billet Aluminum Body
  • 3 Minute Auto Shut Down
  • V-Groove
  • Water And Impact Resistant

Cons

  • Larger size
  • Heavy
  • LED life reported being short

 


Empire EM71.8

Empire Level, the leading maker of levels and other hardware tools in the United States, has improved its famous

True Blue product lineup. The Empire Level 8-Inch Magnetic Billet Level takes care of troublesome issues and allows you to make precise slopes.  The company gives a lifetime warranty for the EM71.8’s exactness, durability, and readability.

Leveling Function:

This torpedo level comes with three acrylic vials for your usual plumb, level, and 45 degrees requirement. However, in addition to these, there is another vial called VARI-PITCH (patented technology), which has markings for 0.125, 0.2, 0.375 and 0.5 inches. The level offers an easy reading of the vials due to the top windows and the unique e-Band contrast system used by Empire Level. The windows offer a 300 degrees viewing angle, which means you can get the reading from any position without being in an awkward position.

Glow Material:

There is no lighting system embedded in this level. However, the anodized aluminum body makes the device easy to spot in the dark. The acrylic blue color in the vials has a glow which helps in taking the reading off at night or in the dark. However, this tool is not recommended for regular work in the dark.

Working Edge:

Like all good torpedo levels, this one also comes with a V groove. Along with this, there is also a magnetic layer comprised of three neodymium magnets which allow the device to stick in one place while you are taking the measurements.

Level Construction:

The Empire Level aluminum billet level is assembled utilizing an exceedingly sturdy aluminum (aircraft quality) with tapered closures to permit easy handling in/out of the pocket. There is also a 6-inch ruler embedded in the device for added convenience. The body is break, leak and fog-screen resistant. The vials are made from a special material and are 400 percent stronger than the vials found in average levels.

Pros

  • Multiple Measurement Modes
  • Easy To Read With The E-Band
  • Strong Neodymium Magnets
  • V-Groove
  • 6-Inch Ruler
  • 1-Year Limited Warranty

Cons

  • Not recommended for usage in low light
  • Discrepancies about country of origin (USA/Taiwan)
  • Some quality control issues reported by customers

 


Swanson Tool TL041M

The TL041M torpedo levels from Swanson Tool Company is exceptionally great. It isn’t the least expensive level you

can discover, however, the quality it conveys makes it certainly justifies its premium price. The billet development and laser-etching make this level convenient for any circuit repairman to have in his or her arsenal.

Leveling Function:

The Swanson torpedo level has four vials at 30, 45, plumb, and level degrees. These vials, alongside the Tri-loc connection, enables you to impeccably twist pipe above, close to, or beneath impediments without over bending the pipe. I tested it and it worked splendidly and effortlessly. The gadget also incorporates a laser scratched 5″ and 13 cm scale on either side.

Glow Material:

The bright orange anodized body and the glow-in-the-dark vial liquid allows you to use this level in low light conditions. There is a low powered LED light present as well, however, you might need a flash light, especially if you have eye problems, to take the readings off without straining your eyes or stressing.

Working Edge:

We found the V section on the edge to be flawlessly formed for tolerating round stock and the levels could be used for measurement of different pipes easily. The level likewise has four rare-earth magnets which are convenient in executing a two handed job. The level will stick to anything ferrous. The only bad thing regarding the edge is that the Tri-loc is on the side of the V groove, making it almost useless unless you remove the brass fastener.

Level Construction:

The level is made from billet aluminum, which means that the aluminum slap has been cut in a single go to achieve the shape of the body. The aluminum is very durable and get easily resist the impacts of a fall or stepping.

Pros

  • Durable
  • 4 Vials
  • Illuminated Readings
  • V Groove
  • Tri-loc
  • 2 Laser Etched Scales

Cons

  • Heavy
  • Lack Of Angles
  • Short Sized

Conclusion

Torpedo levels are fundamental instruments for electricians and one must be kept in your tool box. The products mentioned in this list are quite exceptional and have proven to work as the manufacturer states, with consistent positive feedback. I hope after reading this review you are clear about which level to purchase, according to your requirements.

Tip: Every couple of months, it’s great to check the precision of your level. To do this, simply put it on a level surface, ensure the air bubble is centered and then flip the level upside down and again check that the bubble is centrally aligned.

Best Electrical Gloves

If you are an electrician, you already know that most of the electrician jobs involve risks of injuries, burns, and shocks, making them possibly dangerous.

Your hands are perhaps the most affected body part while you are on job due to their close proximity to wires, tools, and sharp edges.

Therefore, a pair of high-quality electrical gloves is highly recommended for any electrician and is your first line of defense against any imminent risk.

The market is full of electrical gloves of different kinds and with various features.

While this is good in the sense that you have a lot of choices to pick from, but in the practical sense, it leaves you requiring a lot of time to sort through the options and find a quality pair.

Plus, if you are a first-time glove purchaser, you might not even know what to look for! To help you save time and prevent you from making a poor buy, I have researched the market for the best electrical gloves and have reviewed the top five products I found.

Why Spend Extra To Buy Gloves

Some electricians argue that buying electrical gloves are a luxury. I want to tell you that they are not. In fact, they are a basic necessity! According to National Safety Council, more than fifty thousand electricians are injured from various job related incidents and most of these injuries involve their hands.

By purchasing a pair of electrical gloves, you are going to protect yourself from any future danger. Ever heard about the saying that prevention is better than cure?

How I Chose The Picks

Wearing safety electrical gloves is common sense and prevents you from various kinds of harms including cuts, punctures, scraped area, dermatitis, nerve harm, and so forth. A Pair of gloves should be on every electrician’s tool list! Also add great pair of electrical boots to your safety equipment.

While everyone can get a safety pair of their choice, the genuine test here is to discover a set of gloves that actually last.

All gloves, irrespective of the material or brand, wear in time, it’s only an unavoidable truth. Be that as it may, in case you’re similar to me, you’d rather purchase a pair that keeps going a couple of years as opposed to half a month.

Gloves for circuit repairmen and electrical work must be snug and have incredible hold, keeping in mind the end goal to deal with the many jobs requiring intricate fixings, for example, wiring electrical boxes, connecting joints, etc.

For an electrical pair of gloves, nimbleness and adaptability are fundamental properties that allow the electrician to deal with tiny wires and links.

Similarly, cut resistance and impact protection are also vital. I have focused on finding gloves that are top notch in all these properties and more.  After shortlisting my selections, I surveyed the market for customer feedback and eliminated the options which had a poor ranking regarding buyer satisfaction.

Then, lastly, I also got in touch with vendors and professional electricians and asked for their opinion about my picks. After evaluating their opinions, I finally made my ultimate list, in which all the gloves are of great quality and are backed by solid customer / vendor feedbacks.

For your guidance, I’ve assembled a rundown of the best 5 best work gloves for men beneath. You’ll locate an extensive variety of materials, including my very own top choice, leather.

In the event that you require some additional features, I have you covered with an all-rounded pair as well.

Top Electrical Gloves 2017

NamePriceKnuckle
Protection
Finger ProtectionPalm ProtectionComfortRating
Custom LeathercraftLowHigh4.2/5
Klein Electrician's GlovesModerateMedium3.7/5
DeWalt Work GlovesHighHigh4.4/5
Klein Leather GlovesHighXXMedium4.3/5
Klein Lineman Work GlovesVery HighMedium4.1/5

 

 


Custom Leathercraft 125m

CLC 125M is a jack of all trades. The pair is very popular among workmen from different industries and of course among electricians! These gloves convey an unmatched combination of style, purpose and quality. The gloves are designed for a cozy fit on your hands for finesse and less exhaustion, helping you complete the work with ease.

As an electrician, you are using your hands all the time for different kinds of jobs and these properties help you do the job right.  CLC utilizes quality materials and time-tried development strategies to make this a dynamic glove that you will want to keep on, both on and off work site.

The company has produced a Syntrex engineered palm material that prevents any scrapes during lifting of heavy-duty wires or fittings, and additional gives the pair a longer life. Lastly, the pair comes with a stretch fit technology for the thumb and a spandex top for ultimate flexibility and control.

Pros:

  • Reinforced And Textured Finger Tips
  • Mobile Touch Screen Support
  • Padded Knuckles And Thumb
  • Flexible Spandex Top
  • Abrasion Protection For Palm
  • Insulation From Cold
  • Easy Putting On And Off

Cons:

  • Seams At The Finger Tips Can Get Misaligned
  • The Padding Wears Down Quick
  • Some Of The Stitches Start Ripping Sooner Than Expected.
  • Not Suitable For Daily Heavy Lifting

CLC Electrical Gloves have a limited lifetime warranty, which is quite sweet and even rare! The warranty covers any manufacturing defect which you may have found before or during the use of the product. You can buy this pair with full confidence!

 


Klein Electrician Gloves

Since 1857, Klein Tools has produced the world’s finest tools for workmen including electricians. Today, many proficient electricians prefer to choose gloves made by Klein Tools.

The Klein 40074 Electrician’s Gloves come in two sizes, which ensure that you can wear a pair that fits your hand optimally. The gloves have a special palm and finger material (made from TPB 50%, Synthetic Leather 30%, Neoprene 20%) that gives sturdiness and slip resistance when pulling either wire or trying to link them to connections.

The region near the thumb and the finger tips have been reinforced for added sturdiness and protection. The spandex material is breathable and agreeable to wear throughout the day, preventing your hands from getting cramps, while the cuff has been engineered to make wearing and removing the gloves less demanding.

These electricians gloves are easy to maintain and can be washed in a machine. The pair is a great testament to Klein Tools’ devotion to quality engineering for electricians.

Pros:

  • Created In The USA
  • Remarkable Palm And Finger Material
  • Solid Construction And Slip Resistance
  • Broadened Sleeve For Simpler On/Off
  • Reinforced Finger Points For Durablity
  • Fortified Region At The Thumb Base
  • Spandex Material Is Breathable

Cons:

  • Not for use in cold.
  • Needs a “break in” period to be comfortable.
  • Not necessarily true to the size

Klein Tools provide a one year warranty with their Electrical Gloves, which although do not match the offer by CLC, is still pretty good and allows you enough time to test out the product and return it if you found any manufacturing error in it.

 


Dewalt Work Gloves

A Fortune 500 Company, DeWalt makes a whole range of accessories for workmen that are Guaranteed Tough.

Some of the accessories made by DeWalt are regularly used by electricians all around the world. The trademark yellow and black DeWalt DPG780 Performance Electrical Gloves gives a solid hold and security insurance where you require it most.

The TPR impact guards deters any possible injuries or abrasions from incidental bumps or scrapes while maintaining flexibility and comfort.

The palm of the gloves is made of a patented synthetic material, which can endure scrapings, and on top of that there is a layer of PVC on the exterior of the palm securing it totally.

The thumb likewise has a synthetic as well as a PVC layer for robustness. This pair also has special nail guards made from synthetic leather to ensure that you avoid any chances of the painful impact on your nails (electricians can get a habit of hurting their nails!).

The cuff of the gloves is made from neoprene hook and loop closure making it easy to wear them on or off. Finally, maintenance wise, you only need to put the pair in a washing machine every week to keep them looking like new!

Pros:

  • TPR Protection
  • Synthetic Palm with PVC
  • Thumb Protection
  • Silicone Grip Finger Tips
  • Synthetic Leather Nail Guards
  • Neoprene Wrist
  • Machine Washable

Cons:

  • Not dexterous for handling small parts like screws
  • Size issues reported by customers

As aforementioned, this pair of Electrical Gloves comes with DeWalts Guaranteed Tough label. This means that the product has a huge three year warranty period from the time of purchase.

Even more, it comes with a 30 days money back return, no questions asked.

 


Klein Journeyman Leather Gloves

Here we have another pair of gloves by Klein Tools. The Journeyman Leather Electrical Gloves are the ideal work glove for everything except the finest of undertakings with regards to standard work for electricians.

The cozy fit is an advantage of the Journeyman. While you can’t cut wires with a surgeon’s accuracy while wearing these gloves, for medium to huge work, and even some smaller work, these gloves are just about great.

The gloves are very tough because of their synthetic leather body and have finger protection on the top. A couple of areas of the back are made of an elastic material that makes the gloves simple to get on and off, and enable the gloves to have the cozy fit.

The pair showed itself to strike the correct harmony between protection and finesse. However, even with all the protection, the pair of gloves allow you to feel your work while on the job site.

While wearing the Journeyman, you can ream and run conduit, cut wire and execute numerous more jobs. The gloves are totally extraordinary for typical electrician jobs.

Pros:

  • Sturdy Exterior
  • Comfortable Interior
  • Easy On/Off
  • Durahide Palm And Leather Layer For Finger Protection
  • Flexible
  • Can Stretch Back As Well As In The Front

Cons:

  • Not Great For Use In Wet Conditions
  • Could Use Some More Padding
  • Break-In Takes Time

Klein Tools provides a single year warranty period for all of its Electrical Gloves range. This pair is no different.

 


Klein Tools Linemen Work Gloves

The last pair of gloves to be reviewed in this list is also by Klein Tools. Now you would imagine that this is a reputable and very reliable company, given the number of quality products it has, and its popularity amongst electricians all over the world testifies it!

The Klein 40082 Lineman Work Glove come in different sizes and are made from delicate grain leather body with strengthened synthetic palm and finger patches.

The 4-Inch leather and neoprene sleeves with side vents make using the gloves quite comfortable, while the twofold column cushioned knuckles guarantee enough durability for your day to day electrician jobs.

The 40082 gloves include a dark spandex back with Klein Lineman logo on the top. The yellow and black color may give the gloves a sense of the DeWalt style, which may or may not be a favoring factor depending upon your likeness towards DeWalt.

Overall, these gloves are a great pick if you are a linesman or a small-scale electrician.

Pros:

  • High Quality Leather Body
  • Neoprene Cuffs
  • Vents On The Side For Sweat Control
  • Reinforced Leather Palm And Finger Patches
  • Padded Knuckles And Finger Tips

Cons:

  • Some quality control issues
  • Sizing irregularities reported by customers

Like all other Klein Tools gloves reviewed above, this one also comes with a one year warranty, giving you ample time to test out the product and replace it if you find any manufacturing faults.

Conclusion

Now we have reached the end of our exclusive electrical gloves review. While this is not an exhaustive list, all the items in this list are tested and have a proven track record allowing you to have confidence while making a purchase.

Friendly tip: To help guarantee the life of the gloves and your hands’ security, gloves should be put away appropriately when not being used. This means that gloves must not be folded for a long time and should be kept out of unnecessary exposure to sunlight, dampness, ozone and or other chemicals that may react with the synthetic composition of the glove materials.